Autowatch Ghost II non-detectable immobiliser system for Ford £449*
FREE Engine Carbon Clean worth £89.99 with all installs
Did you know your Ford can be stolen without the need for the thieves to use a key?
Keyless entry theft is on the rise by 30% in the last 3 years.
The Ford Autowatch Ghost II immobiliser system is intended to battle ever-increasing vehicle theft through key cloning, key theft, and key signal jamming. This next-generation security immobiliser is ideal for your Ford’s security, compatible and available for most B-Max, C-Max, Ecosport, Edge, F150, Fiesta, Focus, Galaxy, Kuga, Mondeo, Mustang, Ranger, S-Max, Transit Connect, Transit, Transit Custom and Tranist Courier models.
* Autowatch Ghost II is now TASSA approved IF it is installed by a TASSA accredited member, which all our installing technicians are. The new price of £449 is an Autowatch set retail price for ALL TASSA approved installations. It is our advice to be wary of anyone selling Ghost II installations for a cheaper price as they will almost not be TASSA accredited member. Only TASA accredited installations will be registered on the international database as well as be police and insurance approved. Therefore, that extra £50 over the old price is not only peace of mind but will also likely save you a lot more in the long run when it comes to your insurance premiums.
STOP YOUR FORD FROM BEING STOLEN
The Autowatch Ghost II immobiliser is the next generation technology against Ford…
- key cloning
- key theft
- jamming / blocking keyfob signals
An example of how quickly and easily a key can be cloned once in a vehicle:-
Installed discreetly and hidden into the original wiring harness of your Ford the Ghost II immobiliser effectively becoming part of the vehicle’s own electrical system. The immobiliser uses Ford’s own dash and steering wheel controls for entry of a PIN meaning no radio frequencies from third-party keyfobs or remotes. All of this combined makes the Ghost II system completely undetectable to a vehicle thief.
- Jason Marshall Frankson
I booked my 2008 VW Jetta 2.0 litre diesel in for 28/04/17. Shaun arrived early and made a start by doing an ecu fault check followed by setting my car up onto the Carbon clean machine. My engine was running for approx 30mins and during this time revved the engine to help clear any build up of carbon. Shaun was very informative about the whole process and exIained exactly what was happening during the Carbon Clean. I am very pleased with the outcome and have a peace of mind knowing my engine will be much cleaner and running more sufficient.
After the job was finished, I drove around for about 15mins, recommended and could instantly notice my throttle response was increased and could not see any cloud of black smoke in my rear view mirror. My engine also idles better and just generally feel more smooth to drive.
I have completely removed the egr valve before I had the Carbon clean done and it's made a great difference in stopping the engine oil from getting badly contaminated with carbon.
I am very pleased with the outcome and would like to thank UKCC Auto Techs for your great service. I can definitely recommend your service to anyone.
- Stevie Watson
Just had my fiesta sport van mapped by james ,first class service ,goes through whole mapping process with you so you understand how it works,van got loads extra power in 3rd 4th gear and still pulling in 5th,really happy with results and would recommend to any one wanting a remap done ,good prices as well , if you need a re map or carbon clean speak to this guy first ,cheers james 5 ***** stevie jedburgh .
The Ford Autowatch Ghost II immobiliser will arm automatically once the vehicle is locked. This silently locks the engine preventing the vehicle from being driven away until the PIN is entered using Ford own controls. This also makes it completely transparent to any passengers in the vehicle.
Alternatively, an Apple and Android smartphone app can be used to disarm the immobiliser automatically when the app is active and the smartphone is inside the vehicle.
It’s easy to change the PIN code and if you forget it there’s an emergency back-up. There’s even a valet/service mode that deactivates the immobiliser until either it’s reactivated manually or a set speed limit and driving time is exceeded.
As the Ghost II immobiliser is embedded into Ford’s own electrical systems there are no signals that a thief can listen for nor can a thief replace the ECU (Engine Control Unit) to by-pass the immobiliser.
All Ford Autowatch Ghost II installations carry a 2-year warranty.
Ford Autowatch Ghost II compatibility
- B-Max 2012 – present
- C-Max 2011 – present
- Ecosport 2013 – 2017
- Ecosport [Gen 2 Facelift] 2017 – present
- Edge [mk2] 2015 – present
- F150 [mk13] 2015 – present
- Fiesta [mk7] 2013 – 2018
- Fiesta [mk8] 2018 – present
- Focus [mk2] 2008 – 2011
- Focus [mk3] 2011 – 2018
- Focus [mk4] 2018 – present
- Galaxy 2015 – present
- Kuga 2013 – present
- Focus [mk2] 2008 – 2011
- Mondeo [mk4] 2010 – 2014
- Mondeo [mk5] 2014 – 2015
- Mondeo [mk6] 2015 – present
- Ranger [T5] 2011 – 2015
- Ranger [T6] 2015 – present
- S-Max [mk1] 2010 – 2014
- S-Max [mk2] 2015 – present
- Transit Connect  2012 – 2018
- Transit Connect  Facelift 2018 – present
- Transit Connect  2012 – 2018
- Transit Custom [Euro5] 2013 – 2016
- Transit Custom [Euro6] 2016 – present
- Transit Courier 2014 – present
NOTE: Autowatch Ghost II for Ford compatibility is ever-improving so if your vehicle model isn’t listed above please inquire with us.
How is Autowatch Ghost II installed on a Ford?
Firstly all our mobile technicians are Autowatch trained and approved Ghost II immobiliser installers carrying full insurance.
On arrival, they will assess your Ford and for reasons of security must be left on their own to complete the installation securely i.e. no one should know where the Ghost II unit is installed in the vehicle.
Once installed our technician will take you through the process of arming / disarming, setting up and changing the PIN code as well as entering the immobiliser into valet/service mode.
Each Ghost II unit comes with a unique override code that is supplied in the form of a plastic scratch card along with all the documentation. You will be taught how to use this override code using a dummy code. You should only scratch to reveal and record the unique code once on your own and not in front of our technician.